Need Flash? Home Bio ReactorX Equipment Multimedia FAQ Contact Links
 
Biography

Rotor Tech

Rotor Tech Blade Series

Rotor Tech blades are produced to be the highest quality design and finish and after using these for over five years I have never been dissapointed.

The tip designs and airfoils used on Rotor Tech main blades are extremely efficient. They are also notably quieter in flight and during hard 3D. This is also an indicator of efficiency due to lack of "blade slap" which is an audible waste of engery that your engine must bear with other blade brands. Using Rotor Tech blades I have notably more available power, quick and agressive cyclic response and collective pop.

3D 710mm

Rotor Tech's newest blade SG Edition 3D 710 blades have been optimised for 90 size helis and extreme 3D performance. New trim schemes, weighting and quality throughout makes these blades really stand out in the air and on the ground. I've used this version of main blade to win the Xtreme Flight Championships, 2nd HTC Taiwan Cup. Spectators and pilots usually note the high speed my helicotper travels and ability to rapidly change directions compared to others.

Run the RT710 blade with very rigid dampening at 1900-2000 RPM and feel this RT blade come to life.

Quick specs:
• 710mm
• 182g
• Rounded A-Tip design
• 5mm Blade bolt hole with included 4mm sleeves and washer sets
• Double reflex symmetrical airfoil
• Pre-balanced
• High visibility White and Yellow in mold painted tip design
• Laser etched reflective Blade Root graphics
• Root to tip safety wire built into each blade to prevent dangerous blade parts separation during a crash

Working with Rotor Tech, we have developed the most advanced F3C blade on the market - SG-720F3C. Nearly all F3C US Nationals competitors are now using this fast, predictable and ultra stable RT SG-720F3C blades. The F3C blade has slightly narrower chord for speed and efficiency, and A-shaped Tip design for extremely fast forward speed capabilites and airplane-like forward flight tracking and stability. Hovering in all conditions with this blade is less work for the pilot and noted "locked- in" look that World Championship judges are looking for. At the last Worlds in Poland top pilots were even sharing limited sets of these blades in the final rounds to gain the advantages only this blade offers. I could not have taken two silver medals in the past World Championships without these blades bolted to my helicopters.

Hover RPM of 1650 is extremely locked in while running these SG720's up to 2050RPM in forward flight will offer jet like speed and solid tracking. Fairly rigid dampening setup on the helicopter's rotor head combined with these blades yields the best results.

Quick specs:
• 720mm
• 225g
• Straight A-Tip design
• Double reflex symmetrical airfoil
• Pre-balanced
• 5mm Blade bolt hole with included 4mm sleeves and washer sets
• High visibility White and Red in mold painted tip design
• Laser etched reflective Blade Root graphics
• Root to tip safety wire built into each blade to prevent dangerous blade parts separation during a crash



Tail Blades

RT tail blades feature many of the same traits as the mains including highest quality and efficient design.

95mm for 50 size helis

105-115mm for 90 size




Website Design:Waxworks Creative